How to make your cake and size you want.....

Have as big a size as you want...

Ok so you don't want a piece the same size as mine.

Here is how to make the cake any size you want.

First this will still be 8 pieces if you make the cake.

To make to tops.

Start with a square and size you want.

The only important measurement here is

the side of your square.

We will call this A  
 For tab, say you used 1cm wide....

So if my square was 20cm by 20cm
half this is 10cm.

A would be 10cm - 1cm =9cm

so A= 9cm

and you said you would never use algebra..

Repeat making you tops exactly as in this picture.

To make the side of the slice.

Decide how much depth you want for the cake.

I made my tabs quiet fat at 2cm wide but you can make them skinnier, at 1cm..

If you were making a smaller cake 

you could do 7.5 cm wide.

and score at 1 cm for tabs, this would mean you got 4 slices from a sheet of scrapbook card stock.

and your cake would be 5.5cm thick as you need a tab top and bottom..

This is where you need the A..

to find out how long a piece you need

Just do 3 times A plus 3cm

Or measure roughly round all the sides of the triangle and add 3 cm for the tab .

A bigger tab means it stays closed.

Yes it is that easy

Score your card at A and 2A.

so mine is at 9cm and 18cm.

We don't need to score the lid till we stick the slice together.. 

So when you have made the slice and you fold it over you then find out where you need to score

 for the tab.

Make Sure you tab is shorter than 
the A measurement.

OR the box won't close,

so you can cut as much as you like off too make the tab look neat, but please leave about 3cm as I said, or the tab may jump out then it's closed.

You don't want a cake with 8 pieces..

If you don't want to make this many it's easy to make it your size.

Take a piece of scrap paper the same size as you want to make your cake...
it needs to be a Square

Mark the center of the paper,  cut down to center.  

Now fold the paper over until you have as many slices as you want for your cake, 
don't cut it just fold like a fan ..
Yes bits may stick out, but you can keep making you section larger or smaller till you have equal folds.
This way you can have as many slices as you want.

Now cut one section off.
Yes it may seem a funny shape. 
But all you really need is that it has the point at the center. 
This is your template

To make your slice tops...

Remember to take half the size of your card and take 1cm off to get your A length.

You need to put both pieces of card together.
If your going to make 5 pieces 
put 5 paper clips around you square 
at equal distances. 

YOU NEED TO DO THIS AS YOUR GOING TO WANT A TOP AND BOTTOM 
some of the pieces may be a tiny different in size, this really doesn't matter so long as you use the pairs held by the paperclip.
Also since it has all been cut from a whole square
 it will always fit to make a cake.

Mark the center of the card and with the 2 pieces of Square card together, cut down to this point....

Lay your template next to the cut line 
point towards the center, 
move your paper clip if you need too.
Cut along the edge of the Template.
Repeat till all your slices are cut.

Now you just repeat as before. 
From the previous Tutorial...
Either flip the top piece over 
or measure from the point.

have fun.

I want to make a cake box

I wanted to make a cake box.

This is something I discovered while I was looking at a video from Pootles.co.uk

  How to make a cake with 8 slices. 

This is only because it's so easy to do it this way. 

You can see how I do it below.

My cake is going to be 17cm across.

So each slice is 8.5cm by 6.5cm by 6.5cm.

You will need for the of top slice: 

  9.5cm by 9.5cm

Cut you card from corner to corner.

Flip one of your triangles over and mark where the shorter side is on the other piece of card.

This will be 9.5 cm if you want to measure.

Score from the corner to this mark.

Do this on both of you piece of card 

and cut the extra off.

Both you Triangles will have 2 sides the same and a smaller base, score 1 cm away from the base and fold this tab down and cut the corners as in the picture.

You will need for the of sides of a slice: 

21cm by 8.5cm

Score on the long side at 8.5cm and 17cm

Turn it and score on short side 1cm and 7.5cm

You now need to cut to make tabs. 

You need to cut at quiet a steep angle.

Remove the rest of the tab from the long section of your card as this will be the lid and you don't need it.
N.B.  I cut my card too wide so had to do 2cm tabs.. that is why they look wider than yours do.

Making your cake slice.

Fold both your tabs on each side inwards.

Add glue to the tabs on one side of the card.

 .

With the point of the cake at the score mark on long piece of card lay it gentle on top of the glued tabs and  make sure it doesn't over hang.

Hold it for a second till the glue sets.

Turn it over add glue to other 2 tabs and repeat.

Let it dry for a min.  

Fold the lid down.

Mark a line where the side touches the lid 

 Score at the mark for the lid.

Fold the extra down you can leave as much of this as you like too tuck inside the slice.

Sometimes the bit you tuck in needs to have a tiny bit more removed from it's sides so it tucks in easily.

Don't worry if you have to do this as I did as well.

Decorate as you wish.

See my next post on how to customise this to any size.

Hold it together box. One sheet

                      

Yes I know your wondering what the heck I am making.

Not even sure where I saw this, but it makes such a cute box..

Cut your card stock to 

27cm by 15cm.

You need to score at 

6  and 9 cm Short side

3, 4.5, 10.5,16.5, 22.5, 24 Long side.

It doesn't matter which corner you cut off but you need to do the ones Opposite on the diagonal.

You will cut the  green sections off.

And you need to cut down the other score line to the 2nd line as well.

The Purple diagonal lines need to be score. 

Then fold all your score lines inward. 

This means wrong side to wrong side.

This is important as it's how the box folds.

You should be able to lift the long side towards each other and the corners will form points.

Fold the corner towards the large side of the box.

I just put the paperclip there so you can see it properly.   

Now fold the other corner over.

  the one with the flap goes on top, as it hides the inside of the box.

Again I just used the paperclips to hold it stead. 

I removed then, after I took the photo.

With all sides folded, 

You can keep this closed how ever you like.

Also you can trim the top tabs,

or add ribbon, or glue to seal it completely.

Over to you now.

So I made the 2nd one in this list...

so this will be where you score for each of the paper sizes

8cm by 4cm box

Paper size  20 by 36 cm...

Score 8 and 12cm. short side

4, 6, 14, 22, 30, 32cm

6cm by 3cm box

Paper size  15 by 27 cm...

Score 6 and 9cm.Short side

3, 4.5, 10.5, 16.5, 22.5, and 24cm

2 by 1" box

Paper size  5 by 9"...

Score 2 and 3".Short side

1 , 1 1/2, 3 1/2, 5 1/2. 7 1/2, 8"

2.5 by 1.1/4" box

Paper size  6 1/4 by 11 1/2"...

Score 2 1/2 and 3 3/4". short side

1 1/4, 2, 4 1/2 , 7, 9 1/2, 10 1/4

I made this box a tiny bit wider so it was easier to score.

But and this is a nice big but your going to like it...

You can make a box as wide as you like . 

All you need to do is make your starting size bigger on what would be Width

this does not  have the folded over section...

You score the Red number flip your card round 180 degrees and score the same in from the other edge..

Don't forget to measure you middle section, as you need to adjust the bit of the flap nearest to your box to half this size as well, 

so when you fold the section inside they both meet.

Origami Box with Lid, made out of one piece of cardstock

Have you ever been asked 2 years after you make something, How did you do that?

Well this is one of those times.

Take a 9" by 12" piece of scrapbook paper.

It needs to be a decent weight or it won't hold.

Score at 3" 6" and 9"

turn 90'.

Score at 1 1/2". 4 1/2", 7 1/2" and 10 1/"2.

Now using your cutter cut a tiny bit of each side of you paper on the 9" it really is like 1/16".

Your card is now 8 7/8" by 12".

It has to be a bit of each side as this makes the box lid fit over the sides of the box and stops you having to fiddle with odd measurements.

All the folds are folded like valley folds,

This means wrong side to wrong side.

If you do this and crease them all you will find the design makes it self once you do the 8 cuts you need to finish.. 

The next bit sounds odd but is very important.

Measure along the top of the 12"

and mark 2 1/2" and 9 1/2" mark top and bottom.

Now draw a line to make these points meet.

You will be cutting this line.

You cut down  to the  1st score line

stop turn the card stock round

and cut  to the other score line.

You cut four times in all.

If you look at the picture it may explain this better, what you want to do is cut the score line you meet

 to make a T shaped cut.

Your lid will be like on a pizza box.

I did mine first and used wet glue to stick them down as  in the photo.

When you lift the remaining sections it

gives you the sides of your boxes.

The sides will over lap and you just glue them together to give you a little box in the center.

The lids then life up to meet in the center.

This can then be decorated any how you like.

So I decorated mine.
The inside of the lids is 3" by 3".

4 lots of 3" by 3" for inside the box as well,
you may need to take a bit off so it fits snug.

The outside bits of the lids are both 2 7/8" by 2 7/8".
The side panels are 2 7/8 " by 1 3/8"
You need 6 in all.
Then just add ribbon to close.

My boxes for sweets for Halloween.

Here Is the link I found for the boxes.

Denna made them and they are so cute.

The Devotion one is made with the measurements given by Denna.

Two strips of paper.

2" by 7" for box.

2" by 7 1/2" for lid.

Score both at:

2", 3", 5" and 6".

For box you just fold it round and glue the last bit to  the 1st section to make a box with no base.

Fold the second for the lid, and just wrap it round the first base.

Add glue to the 2" sections.

You then just decorate.

The square Half & Half is made with a 2" measurement.

Two strips of paper both

 2" by 10"

Score at 2", 4", 6", 8".

Fold and glue one for the sides.

Then add the other to make the base and lid.