Crafty Blogs
Showing posts with label Card 3D. Show all posts
Showing posts with label Card 3D. Show all posts

Wednesday, October 06, 2010

Tent Card make your own.


I keep seeing this type of card and realised there is an easy way to make them.

Take an A4 Card and fold in half
to form a normal A5 card.
Then just score at 1/2" from each edge.
Add double side tape to these tabs,
Then fold them inwards.

Take another piece of A4 Card.
Trim it down to 11".
I scored mine at 3 1/2 " and 7 " and  9".

Fold your card so you get two peaks.
Now just add the larger card using the double sided tape to attatch the larger card,
your joins are hidden inside.

You can use various sizes for the two peaks.
3" and 6" then 8 1/2"
2 1/5" and 5" then 8"

The reason I cut the card to 11" was to make my sums easier...

In cm..

Score 1.5 cm from edge.

From base card.
cut to 29cm.

9cm and 18cm then at 23.5cm

7cm and 14cm then at 21.5cm

6cm and 12cm then at 20.5cm

Just added a picture to show where to glue.
On the card add glue to the red section.
The green line will match up on the base below.

Once you fold the tabs inwards you will find the green and red lines match up, on the base.









Tuesday, October 05, 2010

Stepper Draws A4 Cardstock size.


This was a Stepper Card Design that I saw  Here
This one is made with an A4 piece of cardstock.

 

If you want it inches.
Draw a line on back of your cardstock.

Make a mark 4 1/8" down and 1 1/4" in from the edge.
Turn the card round and make a mark in the same place on the other side of the cardstock.
Use a ruler and cut this line with a knife.
Every line you score goes upto but not over this line.

With the right side of your card facing you score at 6", until you meet the cut line.
This is the step on the left in the photo.

Now score at 1 1/4"  from the cut line to the edge.
At 2 1/2" and at 7 1/4"
The Pink layer with the flower measures 3 3/4" by  4 1/4"
The draws measure  3 3/4" by 1 1/4".













Draw a line on back of your cardstock.
Make a mark 10.5 cm down and 3cm in from the edge.
Turn the card round and make a mark in the same place on the other side of the cardstock.
Use a ruler and cut this line with a knife.

Every line you score goes upto but not over this line.
With the right side of your card facing you score at 15cm, until you meet the cut line.
This is the step on the left in the photo.

Now score at 3cm from the cut line to the edge.
At 6cm and at 18cm.

This gives you the base.

The Pink layer with the flower measures 9.5cm by 11cm.
The draws measure 3cm by 9.5cm .
I inked the edges to make them stand out.

I added an eyelet as a handle and used my punches to decorate the base of the design.